Panasonic 576

General Information

Manufacturer: Panasonic

Model: 576

Software Version: 2.60 or higher


Panasonic Hardware Requirements:

VoiceTrak Parameter Settings:

Important: All other VoiceTrak parameters must be set to Default.

Use Tone/Cadence file: PANA-40.DBS

Notes:

Tone/Cadence Files - VoiceTrak PANA-40.DBS tone & cadence file should be used for current 576 software. Older 576 software may require the use of ACCUCALL to create a new tone and filter table. Tone/Cadence Files - VoiceTrak PANA-40.DBS tone & cadence file should be used for current 576 software. Older 576 software may require the use of ACCUCALL to create a new tone and filter table.

Transfer to fax machine. The PANA-40.DBS tone table includes incoming fax detection. You may add an "X" type mailbox, which transfers to a fax machine. Also add a line to the VOICE.BAT file which says: 'SET FAX_BOX=xxx' where xxx is mailbox for the fax machine. Not all fax machines send good CNG tones and will not transfer, but if fax tones are detected, the call will transfer to the extension specified in the FAX_BOX setting. Transfer to fax machine. The PANA-40.DBS tone table includes incoming fax detection. You may add an "X" type mailbox, which transfers to a fax machine. Also add a line to the VOICE.BAT file which says: 'SET FAX_BOX=xxx' where xxx is mailbox for the fax machine. Not all fax machines send good CNG tones and will not transfer, but if fax tones are detected, the call will transfer to the extension specified in the FAX_BOX setting.

Telephone  System Programming Requiremnets For The Panasonic 576

Ringing Programming